IP Converter
IPC500

IP Converter

  • Electropneumatic Signal Converter, IPC500 is used for converting direct current (or voltage) signal into standard linear pneumatic signal for process control system applications for converting control signal 4-20 mA or 0-10 V etc. from Electronic Controllers etc. into a linear 3-15 psi or 0.2-1 kg/cm2 or 0.2..1 bar pneumatic signal for operation of Pneumatic control valves, pneumatic valve positioners, damper / louver actuators, final control elements, relays, air cylinders in Power plants, Petrochemicals, HVAC, Energy Management, Textile, Pulp & Paper, Food and Pharmaceuticals etc.

Related Products

Differenti...

Supply Pressure : 3 to 100 psi

Linearity : < ± 0.75 of span

Repeatability : < 0.5 % of span

Hysteresis : < 1.0 % of span

Integral Volume Booster

Low Air Consumption

Zero & Span Adjustments

Compact Size, IP 65 protection

Field Reversible, Split Ranging

Protection against explosion hazards

Control by the pneumatic pressure of control valve

Control of handling force of robot

Control of pressure of balancer and lifte

Supply Pressure: Upto 150 psi

Pressure Sensitivity : < ± .04% of span per 1.0 psig

Terminal Based Linearity : <± 1.5% of span typical ,±2.0 % max .

Repeatability : < 0.5% of span

Hysteresis : < 1.0% of span

Response Time : less than 0.25 sec

Flow Rate : 20 SCFM (34 m3/hr)

Maximum Air Consumption : 0.05 scfm (0.07 m3/hr) midrange typical

Media : Oil free, clean dry air filtered to 40 micron

Temp. Range : -30°C to 60°C

Process connection : 1/4 NPT F

Electrical Connection : 1/2 NPT F

Weight: 2.1 lbs. (0.94 kg)

Impedance : 805 Ohms

Intrinsically Safe For use in Hazardous area

No Reviews

Add Review

Contact for a Quote