Air Quality Monitoring Station Buy Online

Air Quality Monitoring Station

For NO2, CO, O3, SO2, TOVC, PM2.5, PM10, TSP, Wind speed & direction, Temperature & Humidity, Noise detection,Solar Radiation & RainFall. Designed for environmental professionals who need to monitor and manage specific outdoor dust and particulate emissions, continuously and in real-time. The Dust online monitoring station is a principle of light scattering-based instrument that delivers defensible and accurate mass measurement for NO2, CO, CO2, O3, O2, SO2, TOVC, PM2.5, PM10, TSP, Wind speed & direction, Temperature & Humidity, Noise,Solar Radiation & RainFall.

Related Products

Portable F...

Purpose designed for outdoors;

Fully integrated hardware and software system; Real-time NO2, CO,CO2, O3,O2 SO2,TOVC,PM & meteorological parameter;

Access air quality data 24/7/365;

Remote Wan and 4G connectivity;

Plug-in wind speed & direction ,Solar,Rain, Temp.,Humidityand noise sensors;

Battery/solar power compatible;

Add gas measurements at any

Construction and remediation projects;

Industrial perimeter/ fenceline monitoring;

Waste management and Landfill sites;

Port and bulk handling terminals;

EIA and greenfield baseline studies;

Roadside monitoring;

Parameter	Description
Meteorological monitor	Temperature: -30℃~50℃ Humidity: 0~95%Rh Wind speed: 0~60m/s Wind direction: 0~360° Noise:30dB(A)~130 dB(A) Barometric pressure:300~1100hPa Rainfall:0-4mm/min Solar Radiation:0-1500 W/Sq.m
Meteorological Monitor Resolution	Temperature: 0.1 ℃ Humidity: 1%Rh Wind speed: 0.1 m/s Wind direction: 1° Barometric pressure:1 hPa Rainfall:0.5 mm/min
Meteorological Monitor Accuracy	Temperature: ±1 ℃ Humidity: ±5 %Rh Wind speed: ±1 m/s Wind direction: ± 3° Barometric pressure:± 0.5 hPa Rainfall:±5 %
Dust Measuring range	PM2.5:0~2000ug/m3 PM10: 0~2000ug/m3 TSP: 0~2000ug/m3
Dust Resolution	PM2.5:1ug/m3 PM10:1ug/m3 TSP: 1ug/m3
Dust Measuring range accuracy	PM2.5:10% FS PM10: 10% FS TSP: 10% FS
Gas module	O3:0-500ppb NO2:0-500ppb SO2:0-500ppb CO:0-50ppm VOC:0-10ppm H2S:0-10ppm CO2:0-100%vol O2:0-25%
Gas module Resolution	O3:0-1 ppb NO2:1 ppb SO2:1 ppb CO:0.1 ppm VOC:0.1ppm H2S:0.1ppm CO2:1 %vol O2:0.1%
Gas module Accuracy	O3:± 5 FS NO2:± 5 FS SO2:± 5 FS CO:± 5 FS VOC:± 5 FS H2S:± 5 FS CO2:± 5 FS O2:± 2 FS
Gas module response time	<120 sec
Output interface	RS485/4-20 mA for each configure parameter, GPRS
Power supply	110~230V AC, Solar and battery are optional
Sampling time	The standard time is 10 minutes or customized
Installation type	Vertical column or Wall-mounted
Installation Height	>3m

No Reviews

Add Review

Contact for a Quote