Without Display

Description

TIPL offers Universal 2-Wire SMART Transmitter which has PC/ HART programmable enabling selectable input and multi-ranging capabilities in a small instrumentation package. Sensor type and range is selectable via USB/ HART Interface with our USB/ HART Communicator accessory or other HART Communicator and offers the choice of most common sensors used in the industrial environment. As only one instrument is used for all types and ranges of Thermocouples, RTDs, Potentiometers and DC inputs, spares inventory is reduced.

Input-Output isolation is optionally available to avoid ground loop errors. Such errors can occur if Thermocouple is grounded or used above 600ºC with any point in output loop grounded (e.g. negative terminal of 24 VDC power supply / output measuring instrument). Isolated design is also recommended for process current loops where common mode voltage exists leading to common mode noise and for protection in environment with high industrial noise/ voltage transients.

2-Wire Transmitter, is basically available in a Miniature circular sensor head mounting package. It is also offered in Wall or Pipe mounting IP65 Enclosure for use in field, DIN rail mounted package or in flameproof (CMRS certified for Group I, II A and II B), weather proof, cast aluminum enclosure.

  • Universal input (RTD, T/C, VDC, Pot) & Range
  • High accuracy (< 0.1% FS)
  • HART Protocol
  • 2 wire technology, 4 to 20mA analog output
  • High accuracy in total ambient temperature range
  • An internal temperature sensor for active temperature compensation (For T/C)
  • Wide supply voltage range
  • Galvanic Isolation
  • Sensor head/ DIN Rail/ Field mounting

Input

Type

Measurement Ranges

Min. Measurement Span

Measurement Accuracy

Resistance Thermometer (RTD) 2/3/4 Wire

Pt100

-200°C to 850°C

10°K

0.2K or 0.075%

Pt500

-70°C to 500°C

10°K

0.5K or 0.20%

Pt1000

-70°C to 500°C

10°K

0.3K or 0.12%

Pt50

-200°C to 850°C

10°K

0.2K or 0.075%

Resistance Transmitter, 2/3/4 Wire

Resistance (Ω)

0 Ω to 500 Ω

10 Ω

±0.1 Ω or 0.075%

0 Ω to 4500 Ω

100 Ω

±1.5 Ω or 0.12%

Thermocouples (TC)

B (PtRh30-PtRh6)

0 to 1820°C

100°K

Typ. 2.0K or 0.075%

E (NiCr-CuNi)

-270°C to 1000°C

25°K

Typ. 0.5K or 0.075%

J (Fe-CuNi)

-210°C to 1200°C

25°K

Typ. 0.5K or 0.075%

K (NiCr-Ni)

-270°C to 1372°C

25°K

Typ. 0.5K or 0.075%

N (NiCrSi-NiSi)

-270°C to 1300°C

25°K

Typ. 1.0K or 0.075%

R (PtRh13-Pt)

-50°C to 1768°C

100°K

Typ. 2.0K or 0.075%

S (PtRh10-Pt)

-50°C to 1768°C

100°K

Typ. 2.0K or 0.075%

T (Cu-CuNi)

-270°C to 400°C

50°K

Typ. 0.5K or 0.075%

Voltage Transmitters (mV)

Millivolt Transmitter (mV)

-120 to 120mV

5mV

±20µV or 0.075%

-1000 to 1000mV

20mV

±50µV or 0.075%

OUTPUT SPECIFICATIONS

Output

4 to 20mA

Signal on Alarm

Under Ranging

Linear Drop to 3.9mA

Over Ranging

Linear Rise to 21mA

Sensor break/ Open circuit

3.9mA

Load

Max. (V(Power Supply) – 7.5V)/ 0.022A

Linearisation/ Transmission Behaviour

Temperature Linear (RTD/ T/C inputs), Linear (Resistance or voltage inputs)

Galvanic Isolation

2 KV AC (input/ output) (Except TTHRN, TTHUN)

Communiation Interface

Through USB/ HART Communication accessory

PERFORMACE CHARACTERSTICS

Response Time

< 1sec

Reference Operation Condition

Calibration temperature: 27°C ± 5K

Long Term Stability

0.05%/ year

Switch on Delay

5s

Influence of Ambient

Negligible

Load Influence

Negligible

Power Supply Influence

Negligible

Filter Setting

0 to 32s

Resolution

0.3µA

ENVIRONMENT CONDITION

Ambent Temperature Limits

-40°C to 85°C

Storage Temperature

-40°C to 100°C

Condensation

Allowable

Degree of Protection

Ip00 (Without enclosure)/ IP65 (With enclosure)

Shock and Vibration Resistance

4g/2 to 150Hz as per IEC 60 068-26

Electromagnetic Compatibility (EMC)

Interference immunity and interference emission according to GB/ T17626.2-1998), compliance with IEC 61000-4-3: 1995

OTHERS

Dimensions

Sensor Head Mounting

DIN Rail Mounting

IP65 Enclosure

 

Dia 44mm x 24.7mm

115 x 100 x 22mm

115 x 155 x 120

Material

Sensor head/ DIN rail mounting

Housing: Polycarbonate; Potting: epoxy

Housing: Cast Aluminium

Power Supply

10 to 32VDC

 

  •  Process Industry
  •  Oil & Gas
  •  Chemical & Glass Industry
  •  Power Generation
  •  Cement Industry
  •  Metal Processing

Fields marked with * are mandatory fields.

:
:
:
:
:
:
:
:
:




Can't read the image? click here to refresh

Back to Top